For Insta360 X6 PULUZ 60m Waterproof Hosing Sealed Diving Case with Underwater Lens, For Insta360 X6

Features
1. Panoramic Invisible Shooting. Designed specifically for Insta360 X6, this lens helps minimize the obstruction of the housing in underwater panoramic stitching, capturing immersive snorkeling footage. Camera and selfie stick not included.
2. Lens Replacement Required Before Use. The two standard lenses on the camera must be replaced with the included underwater-specific lenses; this is not an additional protective lens. A lens removal and installation tool is included; please follow the X6-specific installation instructions.
3. 60-Meter Waterproof Protection. The polycarbonate housing, combined with a silicone sealing structure and locking mechanism, provides waterproof protection for underwater shooting. When correctly installed and locked according to the instructions, the maximum operating depth is 60 meters.
4. Clear Images and Anti-Fog: The lens material is PMMA with 95% light transmittance. After applying an AR anti-reflective coating, the light transmittance reaches 98%. An anti-reflective anti-fog coating and an anti-drip coating ensure maximum light transmittance during shooting. 12 anti-fog sheets are included to help reduce the impact of condensation inside the housing on the image.
5. Easy Operation and Installation. External buttons facilitate operation after the submersible is installed; the folding two-prong interface and 1/4-inch screw hole allow connection to compatible selfie sticks or diving handles for easy adjustment of shooting modes.

Usage Precautions
1. Please change the lens in a dry, clean, low-dust indoor environment beforehand. Do not disassemble or install in humid or dusty environments; store the standard lens properly.
2. Before each dive, perform a leak test on the empty casing according to the instructions, check the sealing rings, and tighten all latches; the anti-fog plate must be kept dry and not clamped into the sealing surface.
3. After changing the lens and installing the casing, confirm that the camera has correctly recognized the submersible casing. Complete the necessary settings and calibrations according to the X6-specific instructions before conducting a test recording.
4. After using seawater, rinse the locked casing with fresh water, dry it, and then open it.
5. Before resuming normal shooting after removing the submersible casing, please replace it with the standard lens and complete the stitching calibration according to the instructions; the underwater lens cannot be used as a long-term replacement for the standard lens.

Package List
1. Full-Cover Waterproof Case x 1
2. Diving Lens x 2
3. Lens Protective Cover x 1
4. 1/4-Inch Screw Adapter Base x 1
5. Long Screw x 1
6. Lens Suction Cups x 2
7. Air Blower x 1
8. Lens Removal Tool x 1
9. Cleaning Cloths x 2
10. Anti-Fog Inserts x 12 (3 Packs Total)
11. Finger Cots x 5
12. Brush x 1
13. Pry Tool x 1
14. Finger Cots x 5
15. Wet and Dry Wipes x 2